|
|
BUILDING ADMIXTURES
11 products in this category. You are viewing page of 3.
|
201 MORTAR ADMIX
Mortar Admix is an air entraining plasticiser that replaces lime in the mix to provide an easy to work “butter like” consistency to the mortar and to prevent shrinkage, cracking and crazing during the setting process. For use in brick laying and plastering mortars. Provides a degree of frost resistance and long term resistance to freeze-thaw cycles when set. To BS 4887.
 Technical Data COSHH Data
|
|
|
202 INTEGRAL LIQUID WATERPROOFER
Integral Liquid Waterproofer is a liquid additive that provides long term water protection to mortar, concrete and rendering. Reduces water permeability and is suiTABLE Everbuild_NZ.for all applications where resistance to water absorption is necessary such as pool and tank linings, roof areas, external rendering and pointing and structures below ground level. To BS 4887 (initial air).
Technical Data COSHH Data |
|
|
203 ACCELERATOR & FROSTPROOFER
Accelerator & Frostproofer is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering to provide frost protection during the setting period. Effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture.
Technical Data COSHH Data |
|
|
204 EVERMIX 3 IN 1
Evermix 3 in 1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application. Evermix 3 in 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting.To BS 4887 (initial air).
Technical Data COSHH Data |
|
|
205 EVERMIX PMP
Evermix PMP is a resin based mortar plasticiser in powder form packed in easy to dose 15 gramme sachets for accurate dosing. Replaces lime in the mix to provide an easy to work “butter-like” consistency and to prevent shrinkage, cracking and crazing during the setting process. For use in all mortars and provides a degree of frost resistance and long-term freeze-thaw cycles when mortar is set. To BS 4887.
Technical Data COSHH Data |
|
|
